What are the measures taken when trimming the stamping die?
Posted on 2020-11-17 15:17:14
In order to prevent some accidents or failures, we can make some measures to reduce certain losses or costs. The same is true for stamping dies. What are the measures for trimming stamping dies? Let's talk about the mold design.
1. Scrap iron is produced at the scrap knife
The scrap iron in the scrap knife is mainly caused by the mold process. The measures are as follows: change the shape of 10 mm in front of the cutting edge of the upper die trimming waste to make a breakthrough edge shape, and mill the edge of the waste cutting edge of the lower die empty.
2. The plate does not conform to the shape and the edge clearance is unreasonable
The measures taken are to use Op10 drawing plate buckle to study and trim the profile of each part of the edge die, repair the upper and lower edge clearance and adjust the feeding depth.
3. Edge trimming
If you want to know more about the measures taken when trimming the stamping die, you can click our website page of die design to browse!
1. Scrap iron is produced at the scrap knife
The scrap iron in the scrap knife is mainly caused by the mold process. The measures are as follows: change the shape of 10 mm in front of the cutting edge of the upper die trimming waste to make a breakthrough edge shape, and mill the edge of the waste cutting edge of the lower die empty.
2. The plate does not conform to the shape and the edge clearance is unreasonable
The measures taken are to use Op10 drawing plate buckle to study and trim the profile of each part of the edge die, repair the upper and lower edge clearance and adjust the feeding depth.
3. Edge trimming
If you want to know more about the measures taken when trimming the stamping die, you can click our website page of die design to browse!